MaglevParts
Made in
Applies to every table and search
Catalog / Builds / Build a robot arm

Build a robot arm

The bill of materials for a robot arm: a joint actuator for each axis, bought integrated or built from a motor, reducer and encoder, brakes on the joints that carry the arm, smart servos for the wrist and gripper, drivers and a controller.

Joints

One per axis. Integrated joints are the fastest path; size the shoulder and elbow for the arm's reach and payload.

81 parts in all. Open a list above to filter by size, torque and where it is made.

Or build the joints

A frameless motor with a strain-wave or cycloidal reducer gives a compact, stiff joint. Every part one joint needs.

161 parts in all. Open a list above to filter by size, torque and where it is made.

Holding brakes

The shoulder and elbow carry the arm's weight. A brake keeps the arm from dropping when power is cut.

27 parts in all. Open a list above to filter by size, torque and where it is made.

Encoders

An absolute encoder on each joint output means the arm knows where it is at power-up.

98 parts in all. Open a list above to filter by size, torque and where it is made.

Wrist and gripper

Smart serial servos and small linear actuators for the light joints at the end of the arm.

17 parts in all. Open a list above to filter by size, torque and where it is made.

Drivers

FOC servo drivers for joints that do not have one built in, on CAN or EtherCAT.

43 parts in all. Open a list above to filter by size, torque and where it is made.

Controller

Runs motion planning and, with a camera, perception.

23 parts in all. Open a list above to filter by size, torque and where it is made.

Links and brackets

The arm's structure is usually custom. Maglev Make lists shops that machine it from your CAD. CNC milling shops.

Not sure which combination fits? Send what you are building and the numbers you need, and Maglev comes back with a matched set and one fixed price.

How ordering works